Trapzilla Grease Interceptor, 3" Inlet/Outlet, 35 GPM Flow Rating, 167 lbs Grease Capacity

QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

Highlights for the TZ-160 Trapzilla Grease Interceptor

• Offers a flat grease separation curve
• Constructed of corrosion resistant materials suitable for installation in virtually any location.
• Compact Footprint
• Maximum Inlet Flow Rate: 35 GPM (2.21 l/s)
• Grease Retention Capacity: 167 Pounds (75+ kg)
• Material: Rotationally Molded Polyethylene

The Trapzilla Compact, Super-capacity Grease Interceptor collects free-floating (non-emulsifed) grease & oils contained in kitchen drain water flows. As most food service facility managers already know, grease buildup inside a building’s grease containment system is a major cause of problems due to exterior drain line blockages. These problems jeopardize normal operations as well as create health and safety hazards within the facility itself. The proper installation of a Trapzilla Super-capacity Grease Interceptor can reduce or eliminate these grease problems. Use of a Trapzilla system assures minimization and/or elimination of costly sewer surcharges and fines through efficient separation and retention of free-floating grease & oils.  

Trapzilla holds up to 250% more grease retention capacity than conventional grease traps of the same GPM size.  This provides the safety factor so important to sewer utilities and restaurant operators.  Trapzilla is easy to service too.  Your community's pumping contractor can quickly pump a Trapzilla and not interfere with your restaurant's business.

Trapzilla's unique horizontal and vertical baffling system prevents thermal inversion while laminarly spreading the flow for maximum separation efficiency.  Thermal inversion is when the grease trap acts like a huge lava-lamp as warmer water from fresh kitchen flows exchanges with colder water inside a grease separator.  It is why conventional grease separators lose efficiency as they fill with grease.

Trapzilla's compact design and available options allow installation into most Food Service Establishments.  You can install inside the floor, outside in the ground, between floors, above the floor and you can easily configure systems with one, two, or four Trapzilla units for additional capacity.  For high-volume full-service restaurant sites in tight, downtown locations designers can choose to team a high capacity Trapzilla Solids Separator ahead of a Trapzilla Grease Separator.

Trapzilla units are lightweight and can be easily carried and installed by a plumber and his helper.  Trapzilla fits through most commercial doorways and down most commercial facility staircases.  Plumbing a Trapzilla is simple.

 

 Dimensions

 

In-Ground Model: TZ-160-ECA

29- inch extension collar, 3 inch inlet/outlet

The TZ-160-ECA In-Ground Trapzilla Grease Interceptor is rated for 35 GPM, and holds 167 pounds (21 Gallons) of grease in a compact footprint. Perfect for replacing failing steel or concrete interceptors, the TZ-160 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials.

 

The In-Ground models come with a 29" long Two-Piece Extension Collar and a 22" Solid Top Cover that can be removed easily to clean out retained grease.

 

Above-Ground Model: TZ-160-SSA

29- inch extension collar, 3 inch inlet/outlet

The TZ-160-SSA Above-Ground Trapzilla Grease Interceptor is rated for 35 GPM, and holds 167 pounds (21 Gallons) of grease in a compact footprint. Perfect for replacing failing steel or concrete interceptors, the TZ-160 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials.

 

The Above-Ground models come with a SSA-160 Support Stand and 22" Solid Top Cover that can be removed easily to clean out retained grease.

  

 

 

Trapzilla Model No. TZ-160, TZ-160-SSA, and TZ-160-ECA, linear low-density rotationally molded polyethylene grease and oil separator(s), shall be ASME A112.14.3 Rated at 35 gallons perminute (2.21 l/s) peak flow, 167 pounds (75 Kg) of grease storage capacity with a flat grease separation efficiency curve, crush-resistant cylindrical walls, removable lid for full access by grease pump truck for grease removal and removal of solids, integral non-floatation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, separate storage compartments for grease and solids, and including as an integral part of the unit an integral gas trap and a fully removable polyethylene self-positioning keyed cover equipped with sealed thread fas- teners. Included extension collar manufactured out of linear low-density rotationally molded polyethylene with two piece construction for field adjustable height. The Grease Retention Capacity shall be not less than four pounds (4 lbs.) per one gallon (1 gal.) average flow rate. 

Unit may also be listed as TZ160 or TZ160ECA